whats app septic tank cleaning number+971-58-829-9881  gmail contact us uaestcinfo@gmail.com

Sewage Tank and Sump Pit Cleaning

Sewage tank and sump pit cleaning

sewage tank and sump pit

Sewage tank and sump pit cleaning are two totally different tasks. A sewage tank is a huge tank used to treat the wastewater of households. While a sump pit or sump pump is used to capture the exterior water of the house. Well, we have a complete article ahead to discuss in detail about sewage tank and sump pit or sump pump. Also, we will discuss ways sewage tank and sump pit cleaning.

Sewage tank:

A sewage tank is a chamber usually made up of concrete, fiberglass, or plastic. It’s an underground container used for the treatment of domestic wastewater (sewage). Sewage tanks can be used in areas that are not connected to a sewerage system, such as rural areas. The wastewater runs down to the sewage tank through a septic drain field, which provides further treatment. But a disadvantage commonly seen is groundwater pollution may occur and can be a problem.

The term “Septic” is defined as the anaerobic bacterial environment that develops in the tank. It is responsible for the breakdown or decomposition of the solid waste material in the tank. Sewage tanks can also be installed with other wastewater treatment units. Such as biofilters or aerobic systems, commonly used for artificially forced aeration.

In the settling process the solid waste settles down in the tank and liquid waste is passed to the other chamber. Similarly, anaerobic processes reduce solids and organic wastes. This process is known as primary treatment. The efficiency of primary treatment is only moderate.

The rate of accumulation of sludge is known as septage or fecal sludge. This process is faster than the rate of decomposition. Therefore, the sewage tank needs to be cleaned out manually and it’s done with the help of vacuum cleaning.

Sewage tank cleaning:

A septic or sewage tank cleaning has been done in several steps. For your guideline, we have arranged a quick overview of these steps below.

  • First of all the process begins with assessing the sewage tank.
  • Then the entire tank is disinfected with particular chemicals.
  • After that with the help of a sludge pump, all the sludge and scum has been pumped out.
  • Then using high precision equipment, all the sediments, dirt, stains, and fungus has been removed.
  • In the next step, a high-pressure jet is used to clean off the walls, ceiling, and floor of the sewage tank.
  • Step 5 is followed by a vacuum cleaning technique, used to suck out all the remaining dirt.
  • Afterward, an anti-bacterial spray or liquid bleach is used to completely disinfect the tank.
  • Ultra-Violet or UV radiations are on tank and the surroundings in order to get rid of any harmful bacteria.
  • Finally, the tank is completely drained and left for drying.
  • That’s it! Use your tank, it’s cleaned and ready to use.

Inspecting and cleaning a sewage tank is not such an easy process.  In other words, it is a difficult task for an ordinary person. However, with the help of professional services, it will become easy for you.

For a complete cleaning guide, visit: Sewage and Septic Tank Cleaning

Sump Pit and Sump Pump

In the residential construction fields, sump pit and sump pump manage exterior water runoff. Not all homes have a sump pump system installed at the time of construction. The determining factor is typically the potential for the water runoff to be deposited next to the foundations of the home. Homes with these systems are usually at the basement construction. But the sumo pumps can be installed on a cross basis as well. When the builder determines that the water collection is likely, the drain system will be installed around the home near the foundation fitting. The drain pipe is designed to capture water that is advancing towards the foundation wall. Generally, a drain pipe is a 4-inch plastic pipe with holes on top. When the water reaches the drainpipe, the water travels towards the sump pump located below the basement. The electric pump in the system is activated with the flow of water. When the water reaches the predetermined position, it is pumped out via a drain pipe and taken away from the home. This type of water is generally not allowed in municipal waste systems.

Generally, sump pumps are of two types. Some are categorized as submersible and some are pedestal. Sump pumps should be plugged into a dedicated circuit. Always keep your sump pits free from debris to avoid clogging. Inspect your pump at least twice a year. Keep your sump pumps covered. Also, make sure it is sealed if an active radon system is installed.

Sump pit cleaning

For your ease, we have created a few simple steps to clean your sump pit system. Lets uncover these points below:

Gather the necessary equipment needed

Manage to gather the necessary equipment before getting started. For example, a scraping tool, a large bucket to collect waste.

Make sure the water supply is disconnected

Before starting the project make sure to turn off all the water resources leading down to the sump pump. Also, avoid cleaning on a rainy day or in damped conditions.

Disconnect and remove the sump pump

Unplug the sump pump and turn off the breaker that is providing supply to the sump pump.

Clean the sump pump and sump pit

Disconnect the pump from discharging pipe and lift it up from the pit. Put it into a bucket or a strong plastic wrap to avoid dropping down of garbage. Rinse the pump with pressure water like with your gardening hose. Then scrap the sludge and crud with the help of a scraping tool. After scraping, clean the pump again with water.

Use a wet vac to remove any of the remaining water from the sump pit. Remove any solid waste present in the pit. Then scrap the sludge and crud with the help of a scraping tool.

Check for any possible damage

Check both the sump pump and sump pit for any damage. Fix the damage if there’s any or replace the pump or pit new one.

Reconnect the pump

After completing all steps and cleaning the sump system, reinstall the pump into the pit. Connect the water discharging pipe and reconnect the power. That’s great! Your system is running again.

Recommended: Sewage and septic tank cleaning

Septic Tank Cleaning Dubai

تنظيف خزانات الصرف الصحي في دبي

Sewage tank cleaning Sharjah

Septic Tank Cleaning

Septic Tank Cleaners

Leave a Comment